How To Put A Car Cover On A SUV

Installing a car cover is fairly straightforward if you have the right type of cover and the necessary know-how. It’s important to remember to prepare the vehicle first and go from front to back for a simple installation. Carefully work the mirrors in, ensuring that the entire vehicle is covered all the way down the body for the best results. Here's a more detailed explanation of how to put on a car cover.

Preparation

Before installing the car cover, you should ensure that your SUV is fully prepared for being covered. The first step is to make sure it's clean, as any dirt or debris could cause scratching as your car cover slides over the paintwork. Give the car a wipe down with a damp cloth or brush it clean with a soft-bristled brush to remove dirt and debris.

Once the car is clean, you must also ensure it is dry before applying the car cover. Water trapped underneath the car cover can cause various issues, including:

• Making unsightly marks on the paintwork.
• Causing the paint to fade.
• Build-ups of mold and mildew on the car's surface and in crevices.

You will need to let the car air dry to ensure no moisture remains - this is an important step in how to put on a car cover.

Finally, you must prepare the cover itself. It's important to wash your car cover periodically to keep it in prime condition. But you should also check it regularly for signs of damage, as holes or tears will compromise its ability to protect your car. If your vehicle is clean and dry, and the cover is in good condition, you are ready to begin the application.

Starting At The Front

It is best to start the installation at the front of the car. Before you begin, you must identify the front of the cover. With universal covers, this may be slightly more difficult than for custom-fit ones. We ensure our car covers include tags that indicate the front and rear sides, making identification simple. Line up the SUV cover beside the car before you begin.

Now, align the cover with your SUV's front bumper and tuck it underneath. Some covers will have an elasticated rim to hold them in place, which is helpful in windy conditions. If you don't have this, you can use clips to hold the cover under the front bumper while you proceed to spread the cover over the vehicle. In normal conditions, this shouldn't be an issue; you can simply put the cover roughly in position and proceed to the next step.

Working With Mirrors

Some car covers include mirror pockets that your wing mirrors can fit into. This is more often the case for custom-fit covers, but some universal ones may have them as well. If there are mirror pockets in place, take care as you slide your wing mirrors into the pockets to keep them safe. This will ensure a snug fit without causing any damage to the mirrors.

If your car cover doesn't have these pockets, you have a couple of options:

• Carefully pull the cover down over the mirrors.
• Fold the wing mirrors in or retract them for a more snug fit.

Whichever you choose to do, bear in mind that it affects the way your car cover fits. The best outdoor car covers will fit snugly but allow airflow underneath to ventilate the surface of the car. Our car covers tick both these boxes, made from high-quality materials to ensure a good level of protection for your SUV.

Stretching Over The Roof And Windows

When considering how to put a car cover on an SUV, a tight fit around the roof and windows is important. With the cover in place around the bonnet, stretch it over the roof and let it drop to cover the doors and windows. If you have a sunroof, this must be covered as the sun's rays can get inside the car and cause issues like fading or heat damage to the interior.

Once fully spread, the cover should also hang over the rear of the vehicle. You can check that you have even coverage by walking around the outside of the vehicle and seeing how low the cover hangs on both sides. You want to ensure no part of the body of your car is exposed, so check the drop carefully. Some car covers have center lines or a logo that helps verify the positioning more easily.

Securing The Rear

Once you have verified even coverage, it's time to secure the rear of the cover. Align the material with the rear bumper and tailgate, then tuck it underneath and fasten it in place. This can be achieved with an elastic hem, clips, or straps that run under the vehicle to secure it. Utilize the available options to securely install the car cover.

If your SUV has a rear-mounted spare tire, it may create an uneven surface or affect the fit of the cover. Custom-fit covers are a great solution for this issue, as they often include a special pocket to accommodate the spare tire. However, with our universal covers, we ensure a proper fit for your vehicle, and you have a few options:

• Adjust the fit to accommodate the spare tire.
• Use a bungee cord or other tie-down method to secure the cover around the spare tire.

Ultimately, by pulling the cover tightly and ensuring it wraps around the rear bumper, with no part of the vehicle exposed, your cover should effectively protect your SUV.

Tightening And Securing

Once you've achieved complete coverage of your vehicle, it's crucial to secure the cover in place. This step is essential in learning how to put on a car cover. Though you can purchase additional accessories for this, most car covers come equipped with built-in features for securing them, such as:

• Elastic hems
• Drawstrings
• Straps

Our covers include straps and clips that run across the underside of the car, ensuring an extremely secure fit. It's vital to pull the cover tight over the vehicle as much as possible. This not only provides maximum protection but also prevents the wind from loosening any part of the cover. By securing it against the wind, you'll avoid any flapping that could potentially damage your SUV.

It is not entirely necessary to use any tools for installing car covers. However, there are a few tools that can make the job a little easier, particularly for larger SUVs. Here are a few suggestions:

• Gloves: Some protective gloves could make it easier to grip the fabric and to pull the straps tight when securing in place.
• Step stool: This might help with extending the cover over the car if the roof is quite high.
• Clips: You could use these to hold the car cover onto the front bumper whilst you spread it over the rest of the vehicle.

As mentioned, these tools are not entirely necessary. But they could make the process easier for how to put a car cover on an SUV.

It is crucial to prioritize the safety and maintenance of your SUV cover. We've already addressed the question of whether you can put a car cover on a wet vehicle, and the straightforward answer is no. Water presence poses potential risks to the car's paintwork and creates optimal conditions for mold and mildew growth.

Other essential maintenance tips include:

• Cleaning and Proper Storage: When your car cover is not in use, it should be stored securely. Ensure it is fully air-dried before storage and adhere to our provided instructions on regular washing. Additionally, the way you fold the car cover before storing it is significant.
• Regular Inspection: It's advisable to frequently inspect your car cover for any signs of wear and tear. Minor damages can be addressed promptly to prevent worsening, while significant damage may necessitate the purchase of a new cover.

Don’t ignore these important considerations when learning how to put on a car cover.

Whether you're in the market for a cover for a car, SUV, truck, or any other type of vehicle, it's crucial to select the appropriate car cover. SUVs, being larger and having distinct shapes and proportions, require SUV-specific covers made to precise specifications.

If your car cover is too small, it won't adequately shield the entire vehicle's body. On the other hand, if it's too large or lacks the right shape for your requirements, it won't provide a snug fit for effective protection. We offer car covers tailored to various SUV types, and our ordering wizard facilitates the selection of the right fit for your vehicle's make and model. This is how to put a car cover on an SUV for maximum protection.

The best car cover material for an SUV primarily depends on the storage environment. Different hazards are associated with outdoor and indoor car storage, so it's important to choose the right material for your specific circumstances.

• Outdoor storage: When storing your SUV outdoors, you need a durable cover that provides maximum protection against various weather conditions. Our premium polypropylene cover is designed to shield your vehicle from wind, rain, snow, and sunlight. It features a soft inner lining and offers an excellent fit. Other suitable materials for outdoor storage include polyester, nylon, and certain hybrid fabrics designed for weather resistance.
• Indoor storage: If you're storing your SUV indoors, the focus shifts to protection against dirt and dust, as well as ensuring good ventilation to prevent moisture buildup, especially in humid conditions. Our lighter polyester covers or our premier satin cover provide a gentle touch and meet the requirements for indoor protection.

Regardless of the material you choose, it's crucial to learn how to put on a car cover correctly to ensure your SUV receives the intended protection.

We offer a range of car covers tailored to suit various vehicle types. Our polyester and satin car covers are available in different grades to cater to diverse protection needs and budget considerations. Whether you require protection for outdoor or indoor storage, you can find the perfect solution among our offerings. Furthermore, we provide covers in sizes that match the specifications of any SUV make and model, ensuring a snug and secure fit for your vehicle.

For the utmost protection, our premium options are designed to safeguard your vehicle effectively. The premium polyester cover offers robust defense against extreme weather conditions, including wind, rain, snow, and sunlight. On the other hand, our leading indoor cover is gentle on paintwork and highly breathable. Regardless of your requirements, you can count on us to provide a car cover that offers exceptional protection. Our extensive guidance and support team are dedicated to ensuring you know how to effectively put on a car cover.

Learning how to put a car cover on an SUV offers many benefits. When you invest in a quality cover and install it correctly, you preserve the pristine appearance and condition of your vehicle. It will offer outstanding protection against damage from:

• Rain
• Sunlight
• Snow and ice
• Wind
• Dirt and debris
• Humidity

If you don’t use a cover, your SUV is more vulnerable to becoming soiled, scratches on the paintwork, color fading and much, much more. Long-term exposure to the elements is not good for your vehicle, and a good car cover makes a big difference.